Battery and surge protected outlets -
Back up and protect your hardware and data during power outages, surges and spikes.
Surge only outlets -
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Output
Output power capacity -
390Watts / 700VA
Max Configurable Power (Watts) -
390Watts / 700VA
Nominal Output Voltage -
230V
Output Frequency (sync to mains) -
50/60 Hz +/-1 Hz
Topology -
Line Interactive
Waveform type -
Stepped approximation to a sinewave
Output Connections -
(1) IEC Jumpers (Battery Backup)
(4) IEC 320 C13 (Battery Backup)
Transfer Time -
4ms typical
Input
Batteries & Runtime
Communications & Management
-
Interface Port(s)
USB
-
Control panel
LED status display with On Line : On Battery : Replace Battery and Overload indicators
-
Audible Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge Protection and Filtering
-
Surge energy rating
273Joules
-
Data Line Protection
RJ-11 Modem/Fax/DSL protection (two wire single line)
Physical
-
Maximum Height
200mm , 20.0cm
-
Maximum Width
115mm , 11.5cm
-
Maximum Depth
256mm , 25.6cm
-
Net Weight
6.0kg
-
Shipping weight
6.5kg
-
Shipping Height
275mm , 27.5cm
-
Shipping Width
295mm , 29.5cm
-
Shipping Depth
340mm , 34.0cm
Environmental
-
Operating Environment
0 - 40 °C
-
Operating Relative Humidity
0 - 95% non-condensing %
-
Operating Elevation
0-3000meters
-
Storage Temperature
-15 - 40 °C
-
Storage Relative Humidity
0 - 95% non-condensing %
-
Storage Elevation
0-9000meters
-
Audible noise at 1 meter from surface of unit
45.0dBA
Sustainable Offer Status
-
RoHS
Compliant
-
REACH
REACH: Contains No SVHCs